• PHASE OUT

Pushbutton with thermostat and card reader for 2-fold plate (60x45 mm module)

Hotel solutions

CODE: EK-E13-TP-.. | EK-TR2-TP

  • Pushbutton with thermostat and card reader for 2-fold plate (60x45 mm module) Pushbutton with thermostat and card reader for 2-fold plate (60x45 mm module)
  • Pushbutton with thermostat and card reader for 2-fold plate (60x45 mm module) Pushbutton with thermostat and card reader for 2-fold plate (60x45 mm module)
  • Pushbutton with thermostat and card reader for 2-fold plate (60x45 mm module) Pushbutton with thermostat and card reader for 2-fold plate (60x45 mm module)
  • Pushbutton with thermostat and card reader for 2-fold plate (60x45 mm module) Pushbutton with thermostat and card reader for 2-fold plate (60x45 mm module)
  • Pushbutton with thermostat and card reader for 2-fold plate (60x45 mm module) Pushbutton with thermostat and card reader for 2-fold plate (60x45 mm module)
  • Pushbutton with thermostat and card reader for 2-fold plate (60x45 mm module) Pushbutton with thermostat and card reader for 2-fold plate (60x45 mm module)
  • Pushbutton with thermostat and card reader for 2-fold plate (60x45 mm module) Pushbutton with thermostat and card reader for 2-fold plate (60x45 mm module)
  • Pushbutton with thermostat and card reader for 2-fold plate (60x45 mm module) Pushbutton with thermostat and card reader for 2-fold plate (60x45 mm module)
  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  6. 6
  • Form
  • Flank
  • 'NF
  • Deep
  • Surface
  • 3D
Description

The 4-fold pushbutton of Ekinex® 71 series commands loads on/off switching, controls the dimming of lighting devices, controls motor drives for shutters or executes any other programmable command and control function. Thanks to the integrated temperature sensor, the pushbutton can work as a thermostat for a room or a zone. The LED can be chosen in the colour combinations blue / green or white / red. The device integrates a KNX bus communication module and is intended for mounting onto a wall mounting box; it is powered by a SELV voltage directly from the KNX bus and does not require any auxiliary power supply.

Technical data
  • 30 Vdc power supply by KNX bus
  • Current consumption from bus < 15 mA
Delivery

Delivery includes a terminal block for connection to the bus, two pairs of fixing screws.

Accessories

The following accessories are available to be ordered separately:

  • set of 1 square rocker, 2 vertical rectangular rockers, 4 square rockers or 4 horizontal rectangular rockers 
  • double frame Form or Flank version
  • double plate with 60 x 45 mm window
  • a plastic adapter
  • metal support for installation onto round or square mounting box (fixing holes 71 mm apart)
Code LED colours Mounting
EK-E13-TP-BG blue / green with double frame Form or Flank version, without frame (‘NF version)
EK-E13-TP-RW red / white
Card reader

The Ekinex® EK-TR2-TP card reader with RFID technology is used for access control in combination with the EK-TH2-TP card pocket. It is equipped with a bistable relay (4A@24Vac/dc), an input for potential-free contacts and a 3-colour (white, green and red) front signalling LED. The device has an integrated KNX bus communication module and is designed for flush-mounting in a wall-mounting box; it is supplied with SELV voltage via the KNX bus and requires a 12-24 Vac/dc auxiliary power supply.

Technical data
  • 30 Vdc power supply via KNX bus
  • Auxiliary power supply 12-24 Vac/dc
  • Current consumption from bus < 10 mA
Delivery

The scope of supply includes a terminal for connection to the bus line and two pairs of screws.

Accessories

Smart-card EK-TCE-10 (Ekinex® logo in black, pack of 10 cards) or EK-TCC-10 (customised with customer logo, pack of 10 cards)

Functions / Features
Pushbutton
  • 4-fold (possibility to configure up to 8 independent functions)
  • 4 freely programmable LED for each channel
  • 2 colour combination available for the LED (blue / green or red / white)
  • Room thermostat function
  • Integrated temperature sensor
  • Plastic casing
  • Connection to bus line with KNX terminal block
  • Frontal programming pushbutton and LED
  • Wall-mounting installation on round or square wall box
  • IP20 protection degree (installed)
  • Weight 70 g (with mounting support)

 

Card reader
  • Access control via KNX bus TP (twisted pair)
  • Access authorisation following validation of the card
  • Accommodation guest management based on reservation and check-in/check-out period; management of service users based on time slots and passe- partout
  • Programmable output for activation of electric lock or as simple actuator activated by KNX telegrams
  • Signalling of validation in progress (green LED) or unauthorised card (red LED); possibility of activation for "do not disturb" or "room make-over" commands
  • Notification of validation events to supervisory system with memory buffer
  • Plastic case
  • Connection to bus line via KNX terminal
  • Recessed wall mounting on round box
  • Degree of protection IP20 (installed)
  • Weight approx. 50 g (with mounting bracket

Do you want to configuring your product and create a tailor-made project for you?
With Ekinex Planner you can define the needs of a system, choose the most suitable finishes and give a personal touch to the buttons.

Go to the Planner
FISPE13E23TPIEX06
  • v. 6.0 (30/05/2023)
  • PDF | 1,1 MB
  • Download
FISPTR2TP2TH2TPIEXX00
MAEKTR2TP2TP_EN_V1.1.0_2019_01_14
MAEKACCSW_EN_V1.3.0
APEKTRTPTH2TP
DSEKE13TPRWTR2

SUPERIOR PERFORMANCE, TOTAL CONTROL: DISCOVER THE NEW ÆVO SERIES ACTUATORS
Join us for an exclusive webinar dedicated to the new ÆVO actuator range from Ekinex: uncompromising reliability, flexibility and performance for smart control of systems. Register now and take your projects to a new level.

CALENDAR
SIGN UP
26.03.2025   |   9:00 - 9:45   |   EN
close
This website or its third party tools use cookies, which are necessary to its functioning and required to achieve the purposes illustrated in the cookie policy. If you want to know more or withdraw your consent to all or some of the cookies, please refer to the cookie policy. By closing this banner, scrolling this page, clicking a link or continuing to browse otherwise, you agree to the use of cookies.